Description

AME Carbon Ceramic Rotor for Audi RS7 C7 (Carbon Ceramic Replacement)

Upgrade your Audi RS7 C7 (Carbon Ceramic Replacement) with AME Motorsport carbon ceramic replacement rotors. Engineered as a direct replacement for your factory carbon ceramic rotors, AME rotors deliver OEM-equivalent fit and performance — with the added benefits of enhanced durability, improved heat dissipation, and the choice between SiC-coated (CCB) and uncoated (CCM) friction surfaces.

Choose Your Variant

This product is available in two variants at the same price:

• CCB (SiC Coated) — Silicon carbide ceramic friction coating for maximum durability, oxidation protection, and all-weather consistency.
• CCM (Uncoated) — Pure carbon ceramic composite surface for track-focused weight savings and direct friction contact.

AME Motorsport Carbon Ceramic Performance Rotor (CCB) — SiC Coated

The AME Motorsport CCB rotor represents the pinnacle of carbon ceramic braking technology. Built on the same long-fibre carbon ceramic composite foundation as our CCM series, the CCB adds a proprietary silicon carbide (SiC) ceramic friction coating — delivering the ultimate combination of weight savings, thermal resilience, and long-term durability for the most demanding driving conditions.

What Sets the CCB Apart?

The CCB’s defining feature is its SiC ceramic friction layer (>0.8 mm thick) with over 70% silicon carbide content. This coating provides three critical advantages over uncoated carbon ceramic rotors:

• 5× Greater Wear Resistance — The SiC coating lasts approximately five times longer than uncoated carbon ceramic surfaces, significantly extending rotor life.
• Oxidation Protection to 1,400°C — The ceramic layer shields the internal carbon fibre structure from high-temperature oxidation, preserving structural integrity under extreme heat.
• Uniform & Stable Friction — Delivers consistent friction performance from −30°C cold starts to 1,000°C sustained track braking, with no variation in pedal feel.

Full Carbon Ceramic Advantages

• Up to 60% Lighter Than Cast Iron — Dramatically reduces unsprung weight for improved handling, acceleration, and suspension response.
• Zero Thermal Fade — Tested through 2,000 consecutive braking events at 700°C with stable friction coefficient and zero fade. Average μ of 0.40 under high-load conditions.
• Zero Wet Fade — Full braking performance maintained in all weather conditions.
• Superior Mechanical Strength — Long-fibre reinforcement provides tensile strength of 80–165 MPa and bending strength of 150–230 MPa.
• Enhanced Heat Dissipation — Thermal conductivity of 40–80 W/m/K, with optimised internal vane geometry for approximately 6% faster cooling compared to competing carbon ceramic rotors.
• Corrosion Resistant — Passed 240-hour neutral salt spray testing with zero rust, and dynamic salt spray corrosion testing at speeds up to 200 km/h — suitable for daily driving in all climates.
• 17 MPa Torsional Strength — Zero permanent deformation under maximum test pressure, confirming exceptional structural integrity.

Tested to OEM Standards

Every AME Motorsport CCB rotor is validated through a comprehensive testing programme aligned with leading European sports car manufacturer protocols, including:

• Rotary burst testing (achieved 6,200+ r/min vs. 5,500 r/min requirement)
• High-load fade testing at 725°C (80 cycles at 234 km/h → 100 km/h, 0.8g deceleration)
• 2,000-stop endurance fade testing at 700°C
• Cooling rate benchmarking
• Torsional strength testing at 17 MPa / 1.5g
• 240-hour salt spray corrosion testing (GB/T 10125-1997)
• Dynamic salt spray testing at 120–200 km/h

AME Motorsport Ceramic Composite Material (CCM) Performance Rotor

Engineered for drivers who demand lightweight performance without compromise, the AME Motorsport CCM rotor is built using long-fibre carbon ceramic composite technology. This advanced material delivers significant weight savings over cast iron — reducing unsprung mass for sharper turn-in, faster acceleration, and more responsive braking feel on both street and track.

Why Choose the AME CCM Rotor?

• Up to 60% Lighter Than Cast Iron — Dramatically reduces unsprung weight for improved handling, acceleration, and suspension response.
• Zero Thermal Fade — Maintains a stable friction coefficient of 0.40 even after sustained braking at 700°C, delivering consistent pedal feel lap after lap.
• Zero Wet Fade — Delivers full braking performance in rain and wet conditions with no loss of stopping power.
• Superior Mechanical Strength — Long-fibre reinforcement provides tensile strength of 80–165 MPa and bending strength of 150–230 MPa, far exceeding short-fibre alternatives.
• Enhanced Heat Dissipation — Thermal conductivity of 40–80 W/m/K enables faster cooling between braking events, reducing operating temperatures and extending component life.
• Corrosion Resistant — Passed 240-hour salt spray testing (GB/T 10125-1997) with zero red rust, making it ideal for daily-driven vehicles in all climates.
• Extended Service Life — Carbon ceramic composite material lasts significantly longer than conventional cast iron rotors, reducing long-term ownership costs.

Tested to OEM Standards

Every AME Motorsport CCM rotor undergoes rigorous performance validation including burst testing (exceeding 5,500 r/min), high-load fade testing, cooling rate analysis, torsional strength testing, and salt spray corrosion testing — all performed to the same protocols used by leading European sports car manufacturers. Our rotors have demonstrated burst speeds exceeding 6,200 r/min, well above the minimum safety threshold.

CCM vs CCB — Which Is Right for You?

Feature	CCM (Uncoated)	CCB (SiC Coated)
Weight Savings	Up to 60% vs cast iron	Up to 60% vs cast iron
Surface Protection	Exposed carbon fibre	SiC ceramic coating >0.8 mm
Wear Resistance	Standard	5× greater than uncoated
Max Surface Temperature	Standard	1,400°C rated
Oxidation Protection	Basic	Full SiC shielding
Best For	Track-focused builds, weight reduction priority	Street + track, maximum durability & all-weather use

Specifications

Position	Diameter	Thickness	Size
Front (pair)	420mm	40mm	420x40mm
Rear (pair)	370mm	30mm	370x30mm

About the Audi RS7 C7 (Carbon Ceramic Replacement)

The Audi RS7 C7 delivers 560 hp from its 4.0-litre twin-turbo V8 in a sleek sportback body. AME Motorsport carbon ceramic replacement rotors with 420x40mm fronts and 370x30mm rears provide a direct fit upgrade for factory carbon ceramic equipped vehicles, extending rotor life with SiC coating technology.

Technology for Everyone

AME Motorsport believes in making cutting-edge carbon ceramic braking technology accessible to every performance enthusiast. Our rotors deliver OEM-equivalent material quality, validated through the same rigorous testing protocols used by leading European sports car manufacturers — because advanced braking technology should not be reserved for the few. Performance, safety, and innovation for everyone.

Recommended Brake Pad Pairing

For optimal carbon ceramic performance, pair AME Motorsport rotors with dedicated CCB/CCM brake pad compounds:

• Barbaro Racing — Race-bred street and track compounds (C-01, S-01, RS-620)
• NetzschRacing — High-performance street, race, and carbon ceramic dedicated pads
• Pagid RSC Series — European racing specialist compounds (RSC1, RSC2, RSC3) for CCB/CCM/PCCB systems
• Schaffen ZZ Racing — Asian motorsport-proven racing compounds

Frequently Asked Questions

What size carbon ceramic rotors fit the Audi RS7 C7?

The AME Motorsport carbon ceramic replacement rotors for the RS7 C7 feature 420x40mm front rotors and 370x30mm rear rotors, engineered as a direct fit replacement for your factory carbon ceramic rotors.

Are AME carbon ceramic rotors a direct replacement for the factory RS7 C7 rotors?

Yes. AME Motorsport carbon ceramic rotors are engineered as a direct OEM-equivalent replacement for your factory carbon ceramic rotors, requiring no modifications to your existing calipers or mounting hardware.

What is the difference between CCB and CCM for the RS7 C7?

Both variants use the same long-fibre carbon ceramic composite. CCB adds a proprietary silicon carbide (SiC) coating for 5x greater wear resistance and 1,400 degrees C oxidation protection, ideal for daily driving and track. CCM is uncoated, optimised for track-focused weight reduction.

How long do AME carbon ceramic rotors last on the RS7 C7?

AME carbon ceramic rotors significantly outlast conventional alternatives. The CCB variant with SiC coating lasts approximately 5x longer than uncoated alternatives, with zero corrosion even after 240 hours of salt spray testing.

What brake pads should I use with AME carbon ceramic rotors on the RS7 C7?

For optimal performance, pair with dedicated carbon ceramic brake pads from Pagid RSC Series, Barbaro Racing, NetzschRacing, or Schaffen ZZ Racing. These compounds are specifically engineered for CCB/CCM friction surfaces.

{ “@context”: “https://schema.org”, “@type”: “FAQPage”, “mainEntity”: [ { “@type”: “Question”, “name”: “What size carbon ceramic rotors fit the Audi RS7 C7?”, “acceptedAnswer”: { “@type”: “Answer”, “text”: “The AME Motorsport carbon ceramic replacement rotors for the RS7 C7 feature 420x40mm front rotors and 370x30mm rear rotors, engineered as a direct fit replacement for your factory carbon ceramic rotors.” } }, { “@type”: “Question”, “name”: “Are AME carbon ceramic rotors a direct replacement for the factory RS7 C7 rotors?”, “acceptedAnswer”: { “@type”: “Answer”, “text”: “Yes. AME Motorsport carbon ceramic rotors are engineered as a direct OEM-equivalent replacement for your factory carbon ceramic rotors, requiring no modifications to your existing calipers or mounting hardware.” } }, { “@type”: “Question”, “name”: “What is the difference between CCB and CCM for the RS7 C7?”, “acceptedAnswer”: { “@type”: “Answer”, “text”: “Both variants use the same long-fibre carbon ceramic composite. CCB adds a proprietary silicon carbide (SiC) coating for 5x greater wear resistance and 1,400 degrees C oxidation protection, ideal for daily driving and track. CCM is uncoated, optimised for track-focused weight reduction.” } }, { “@type”: “Question”, “name”: “How long do AME carbon ceramic rotors last on the RS7 C7?”, “acceptedAnswer”: { “@type”: “Answer”, “text”: “AME carbon ceramic rotors significantly outlast conventional alternatives. The CCB variant with SiC coating lasts approximately 5x longer than uncoated alternatives, with zero corrosion even after 240 hours of salt spray testing.” } }, { “@type”: “Question”, “name”: “What brake pads should I use with AME carbon ceramic rotors on the RS7 C7?”, “acceptedAnswer”: { “@type”: “Answer”, “text”: “For optimal performance, pair with dedicated carbon ceramic brake pads from Pagid RSC Series, Barbaro Racing, NetzschRacing, or Schaffen ZZ Racing. These compounds are specifically engineered for CCB/CCM friction surfaces.” } } ]}{ “@context”: “https://schema.org”, “@type”: “Product”, “name”: “AME Carbon Ceramic Rotor — Audi RS7 C7 | CCB / CCM”, “description”: “Shop Audi RS7 C7 carbon ceramic brake rotors. AME Motorsport CCB & CCM — 60% lighter, zero fade. Front 420x40mm + Rear 370x30mm. Free global shipping.”, “brand”: { “@type”: “Brand”, “name”: “AME Motorsport” }, “manufacturer”: { “@type”: “Organization”, “name”: “AME Motorsport” }, “offers”: { “@type”: “AggregateOffer”, “priceCurrency”: “AUD”, “lowPrice”: “8581.43”, “highPrice”: “8581.43”, “offerCount”: 2, “availability”: “https://schema.org/PreOrder”, “seller”: { “@type”: “Organization”, “name”: “AME Motorsport” } }}

Shipping: Air Shipping. Lead time: 15-25 business days.

Contact: +61 481 225 000 | [email protected] | automodexpress.com

Explore more from our collection.